Swipe Away Engine Overheat

Overheat can be one of your car problem if you are not care for the condition of the water radiator. The pile of rust and slag in the refrigeration system often became the cause of the machine heat .
To eliminate this problem, you must drain the radiator once a year. Moreover if you ever filled your car with well water or plumbing that had high content of the element of metal. the pile of rust will plug the grill of the radiator. The impact is the circulation of air was not optimal lead to machine overheat. You could drain the radiator yourselves at home. But pay attention to several vehicle such as BMW, Mercedes-Benz or several types of the other car which was equipped the disposal hole of air in its refrigeration system. Should not forget to discard air in the cooling system of this car so that the machine will not experience overheat.
Lets do it! You just need radiator coolant, water, and pliers to help you.
1. Discard the radiator water by opening the disposal hole underneath radiator. If it is not available, you could open the hose of the underside radiator.
2. Release the radiator cap to expedite the water current that are thrown away.
3. Turn on the engine to throw water that was trapped in the machine, while paying Attention to the temperature indicator of the machine. Turn off the machine when the indicator shown the normal temperature.
4. Closed the disposal hole of the radiator or the hose of the underside radiator. Make sure it is tighten perfectly to avoid water flown away.
5. Fill the radiator with water and coolant mixture until full.
6. Turn on the machine so that water able to circulate into the machine.
7. Add more coolant if the surface of water seen decreased.
8. Pay attention to the water until there were no bubble come from the hole mouth.
9. Closed the radiator hole.
10. Discarded the air that remained in vehicle that equipped with air disposal.
You can read other useful tips about car in this site by clicking here.

0 comments:

Post a Comment